FORD SCORPIO

1985-1994 of release

Repair and car operation



Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
- 7. Transmissions
   - 7.1. A mechanical five-speed transmission of type
      7.1.1. A technical characteristics
      + 7.1.2. Service and repair
   + 7.2. A mechanical transmission of type МТ 75
   + 7.3. Automatic transmission А4LD
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
+ 13. A body
+ 14. An electric equipment


b087f616

7. Transmissions

7.1. A mechanical five-speed transmission of type

7.1.1. A technical characteristics
THE GENERAL DATA

The transmission has three shaft, the classical design, four synchronised transfers forward and not synchronised transfer of a backing. The gear wheel of a leading shaft and a gear wheel of a conducted shaft are in constant gearing with gear wheels of an intermediate shaft. The gear change is made by connection of a corresponding gear wheel with conducted shaft. The gear change lever is on a floor. The reverse gear joins by connection of a gear wheel of a backing with two прямозубыми gear wheels of conducted and intermediate shaft.

Type:.

Adjusting data

Distance between a gear wheel of a drive of a speedometer and a lock ring of the synchronizer of 5th transfer
Thickness of lock rings of a nave of the synchronizer of transfers 3–4 on secondary to a shaft
1,63; 1,74; 1,85 mm
Thickness of lock rings of the bearing of a secondary shaft in intermediate картере, and also a lock ring of the synchronizer of 5th transfer on secondary to a shaft
1,75; 1,81; 1,87; 1,93; 1,99 mm
Thickness of lock rings of the bearing of an intermediate shaft in intermediate картере
1,88; 1,95; 2,12; 2,19; 2,26 mm

Transfer numbers of a transmission with engines 1,8, 2,0 and V6 2,4 дм3

Transfer
Transfer number of transfer
Full transfer number
At transfer number of the main transfer
3,64
3,62
3,92
1
3,65
13,286
13,213
14,308
2
1,97
7,171
7,131
7,722
3
1,37
4,987
4,959
5,370
4
1,00
3,640
3,620
3,920
5
0,82
2,985
2,896
3,214
Backing
3,66
13,324
13,249
14,347

Transfer numbers of a transmission with engines V6 2,8 and 2,9 дм3

Transfer
Transfer number of transfer
1
3,360
2
1,810
3
1,260
4
1,000
5
0,825
Backing
3,365

Greasing

Quantity of oil
1,25 дм3
Type
Oil for transmission SAE 80 Ford SQM 2 C 9008 A or semisynthetic трансмиссионное oil Ford ESD M2C 175A

The tightening moments

Carter of coupling to the block of cylinders of the engine
40 – 51 Nanometers
Carter of coupling to a forward part картера transmissions
70 – 90 Nanometers
Kardannyj shaft to a secondary shaft of a transmission
57 – 67 Nanometers
Metallo-rubber connector to картеру transmissions
50 – 57 Nanometers
Cross-beam of a suspension bracket of a transmission to a body
20 – 25 Nanometers
Back part to a forward part картера transmissions
45 – 49 Nanometers
Cover to a forward part картера transmissions
9 – 11 Nanometers
The directing plug выжимного the coupling bearing
9 – 11 Nanometers
Nut of fastening of a gear wheel of 5th transfer on intermediate to a shaft
120 – 150 Nanometers
Basic plate of a gear wheel of 5th transfer
21 – 26 Nanometers
The switch of fires of a backing
1 – 2 Nanometers
Stopper of pouring of oil
23 – 27 Nanometers